Which Alarm Will Work With My Pool?
A swimming pool safety alarms will secure your Chidren Life
The Espio swimming pool alarm has been designed to integrate perfectly with nearly all swimming pools, constructed or under construction, and therefore bring you daily security of your pool. Due to its integrated technologies, the Espio pool alert continually monitors the state of your pool and checks the states of water agitation. Thus, when chilled or dropped at the pool, the pool alarm detects and assesses the submerged wave and triggers its steady alarm siren. Equipped with remote control, you'll have the ability to control and install your Espio pool alarm. Be sure the remote control of your pool alarm is always out of reach of children. Before bathing, we ask you to disable the monitoring of your pool alarm. After that, after swimming as soon as the alarm considers your pond gets calm. It guides the observation of the basin, as a result of its automatic restart. It may take place 10 to 15 minutes following the conclusion of the swim, based on the agitation of the basin and the end conditions.
The Espio swimming pool alarm comes with a discreet and advanced design. According to pool clinics The pool alarm can be used with a significant number of automatic covers. You can use this sort of protection, once the location of the swimming pool in connection with the residence or concerning the accommodation enables an entire intervention, including rescue at the pool, in under 3 minutes. If your pond has measurements more significant than 10 x 5 meters or a specific shape, we ask that you equip your pool with different safety devices.
The Espio Pool alarm consists of:
- One detection unit
- Mounting bracket 1" basin in building" mounting bracket
- 1"present pouch" rubber protection
To install on pools constructed or under construction.
The Espio swimming pool alarm isn't compatible with above-ground self-supporting or soft-walled pools, pools without curbs, mirror pools, infinity pools. The Espio pool alarm designed and parameterized based on standard NF P90-307-1: 2009 and may be used on basins with a maximum size of 10 x 5 meters.
In case of a drop in the pool, the Espio alarm activates its siren based on the demands of the French standard NF P90-307-1: 2009.
The pool alarm has to be audible from your dwelling. The setup of your Espio pool alarm is performed in calm weather on a non-agitated pool. The water from the pond has to be balanced and clear. Check the immersion depth of the alert system. For large pools, you'll need multiple pool alarms.
The existence of a bubble cover isn't compatible with the proper functioning of the pool alarm.
The selection of the location of the alarm system must comply with the following two states: A water depth of 60 cm and a space between the bottom of the lip and the water line between 8.5 cm and 20 cm. The Espio pool alarm shouldn't be higher than 7 meters apart from all potential drop points. It has to be positioned in the centre of the span and against a flat wall of your pool.
Make sure to put in your Espio pool alarm over 1 meter away in the filtration system.
The Espio pool alarm doesn't work when the water is suspended (mild or sharp frost), or when your pool isn't filled. When returning to service, you may naturally need to conduct a functional test. Take care that the water isn't suspended in the tube of your pool alert Espio, to make sure, we ask you to make a functional evaluation of the system.
Child supervision has to be close and continuous, designate one security officer, strengthen surveillance when there are many users in the pool. This alarm system isn't a replacement for common sense or individual responsibility. This pool alarm is security gear that indicates a threat (or risk of danger). Quick intervention within 3 minutes of a responsible adult is required when the alert tone sounds. The user who dismisses the system has to bear in mind that human surveillance has to take over.
